Maintenance requirements and fan operation status of fiberglass cooling towers

　　Today, Shandong Shuangleng Environmental Technology Co., Ltd. will introduceFiberglass Cooling Towerthe maintenance requirements and fan operation status, hoping to help everyone! Let's take a look!

　　During the maintenance of the fiberglass cooling tower, after the equipment is installed, the pipes, water collectors, filling ports and the debris and dirt in the sump should be carefully cleaned to effectively avoid blockage.  

　　Before using the fiberglass cooling tower, a test operation should be carried out. During operation, check whether the fan and tower are installed stably, whether the water distributor is operating normally, whether the nozzle distribution is uniform, and whether the motor is moisture-proof.

　　During the useFiberglass Cooling Towerprocess, the operation of the fan should always be observed. This effectively includes current, voltage, fan vibration, noise, gear oil level, whether there is oil leakage or belt drive looseness and slippage, and whether the water distribution is normal, etc.

　　During operation, the belt-driven bearing seat of the fiberglass cooling tower needs to be filled with lubricating grease. Usually, it needs to be supplemented with an oil gun once a month. For annual continuous operation, all parts are removed, cleaned and replaced. Always pay attention to tightening connecting parts and bolts.

　　The water turbidity of the fiberglass cooling tower should not exceed 10 mg/L. During operation, consider regular drainage or increased water quality stabilization treatment according to the water quality. The filling material uses modified high-temperature resistant polyvinyl chloride (PVC) or high-temperature resistant polypropylene (PP).

　　The above is the introduction by Shandong ShuanglengFiberglass Cooling Towerof maintenance requirements and fan operation status. Welcome your call at any time!