What issues should be paid attention to during the maintenance of fiberglass cooling towers?

　　Fiberglass Cooling TowerWhat issues should be noted during maintenance?

　　During the maintenance of a fiberglass cooling tower, after the equipment is installed, the pipes, water collectors, filling ports, and the sump should be thoroughly cleaned of debris and dirt to effectively prevent blockage.  

　　Before using the fiberglass cooling tower, a test operation should be performed. During operation, check if the fan and tower are installed stably, if the water distributor is operating normally, if the nozzle distribution is uniform, and if the motor is moisture-proof.

　　During the useFiberglass Cooling Towerprocess, the operation of the fan should always be observed. This includes current, voltage, fan vibration, noise, gear oil level, whether there is oil leakage or if the belt drive is loose or slipping, and whether the water distribution is normal, etc.

　　During operation, the belt-driven bearing housing of the fiberglass cooling tower needs to be filled with lubricating grease. Typically, it needs to be replenished with a grease gun once a month. For annual continuous operation, all parts should be removed, cleaned, and replaced. Always pay attention to tightening connecting parts and bolts.

　　The inlet water turbidity of the fiberglass cooling tower should not exceed 10 mg/L. During operation, consider regular drainage or increased water stabilization treatment according to the water quality. The filling material uses modified high-temperature resistant polyvinyl chloride (PVC) or high-temperature resistant polypropylene (PP).

　　The above is an introduction by Shandong ShuanglengFiberglass Cooling Towermaintenance requirements. Welcome your call at any time!