How should spray cooling towers be maintained?

　　How should a spray cooling tower be maintained?

　　During the maintenance of the spray cooling tower, after the equipment is installed, the pipes, water collectors, filling ports and the debris and dirt in the sump should be carefully cleaned to effectively prevent blockage.  

　　Before using the spray cooling tower, a test operation should be carried out. During operation, check whether the fan and tower are installed stably, whether the water distributor is operating normally, whether the nozzle distribution is uniform, and whether the motor is moisture-proof.

　　During the use ofspray cooling towerthe operation of the fan should always be observed. This effectively includes current, voltage, fan vibration, noise, gear oil level, whether there is oil leakage or whether the belt drive is loose and slipping, and whether the water distribution is normal, etc.

　　During operation, the belt-driven bearing seat of the spray cooling tower needs to be filled with lubricating grease. Usually, it needs to be supplemented once a month with an oil gun. For annual continuous operation, all parts are removed, cleaned and replaced. Always pay attention to tightening connecting parts and bolts.

　　The inlet turbidity of the spray cooling tower does not exceed 10 mg/L. During operation, consider regular drainage or increasing water quality stabilization treatment according to the water quality. The filling material uses modified high-temperature resistant hard polyvinyl chloride (PVC) or high-temperature resistant polypropylene (PP).

　　The above is the maintenance requirements introduced by Shandong Shuanglengspray cooling towerWelcome your call at any time!